West System barrier coat failure and what we learned
When our West System barrier coat resulted in blisters all over the hull, we spent hours upon hours trying to figure out what had gone wrong.
When our West System barrier coat resulted in blisters all over the hull, we spent hours upon hours trying to figure out what had gone wrong.
This is our tips and tricks for applying Coppercoat. It covers the application and tips for really activating the anti-fouling properties.
There is no excerpt because this is a protected post.
We had some reinforcements we wanted to do while working on the hull. This means glasfiber work, grinding, sanding, fairing.
We are switching from traditional anti fouling to CopperCoat. The first step was to remove all the old paint and barrier coating.
We spend a lot of time maintaining and upgrading Linnea. We want her to feel like ours and the more work we put in the better we get to know our boat, and the more she fits our needs and dreams. Here we’ll try to share our work, both good solutions and solutions that we had to rethink more than once!